TK1026 Injectester CRI is more than a test bench with its fast measurement system and many updated features. The measuring system is even faster and capable to measure high flow injectors
upto 1000 mm3/stroke. Another new feature is improved temperature control, providing more accuracy
in injector fuel readings.
• Updated information concerning test and repair instructions,
• Latest version control software and drivers,
• User's manuals and troubleshooting guides,
• Repair manuals for repairing various common rail injectors.
New TK1026 Control Software allow users to create their own test plans easily based on templates and injector generations. The software has advanced features to program the drive signal with 11 parameters as to apply exact signal as on the vehicle.
TK1026 Common Rail Injector Test Bench
High Pressure System
HP Pump Bosch Cp3 or Denso HP3 HP Pump Motor 4 kW. 1400 rpm @50 Hz; 1800 rpm @60 Hz Max Pressure 2200 bar Pressure Regulator Bosch Rail Volume 28 cm3
Test Oil Supply System
Tank 27 L LP Supply Pump 4 L/min, max 4 bar Heater Element 2kW Cooling System Air Cooled, 4 L/min ∆T= - 5 °C between 40- 50 °C Filter 5 µ
HP Sensor Bosch 2200 bar Flow Sensor
1000 mm3/stroke @ 1000 Injections per minute
Piezo with Acceleration correction.
± 10 µs Accuracy
Electronics Maktest CR1
Processor Dual Core 1.86 Ghz or X5 28350 1.44 Ghz RAM 2 GB HD SSD 64 GB Monitor 15" Touch Screen /Wide OS Wındows 10
Width: 930 mm
Depth: 650 mm
Height: 1690 mm
Weight: 270 kg
Width: 1090 mm
Depth: 860 mm
Height: 1890 mm
Weight: 360 kg